This is the tracksuit we build for teams and labels that want a piece worn beyond the session. It’s a full-zip track jacket with a stand collar and a matching pair of joggers, cut in black with royal-blue curved panels and white piping, and finished with an embroidered crest, ribbed cuffs and drawcord hems. It reads as much like streetwear as training kit, which is why it sells to fashion buyers as well as clubs.

Both pieces are cut from a soft poly-knit that holds its colour and keeps its shape after repeated washing, and the contrast panels are stitched rather than printed, so the piping stays crisp. Your crest, your colours and your panel layout are all set from your reference, and we mock the set up before anything is cut.

Men’s and women’s blocks across the standard range, sizes mixed freely. Bulk from 10 pieces per design; production takes 15–30 days depending on order size.

This is the women’s one-piece we build for yoga, running and studio work, where a top and leggings that shift against each other get in the way. It’s a short-sleeve zip-front bodysuit in a solid colour with an open back, cut close from a stretch knit that holds the body and moves with it — our reference runs it in brown across a five-colour range, and the whole garment is one continuous piece, so there’s nothing to tuck or adjust mid-session.

Because it’s cut on a stretch block, it recovers its shape after a workout instead of going slack, and the zip lets you control airflow as you warm up. The chest and the leg are both clear for a small printed or silicone logo, which is how most studios and small labels take it — a clean colour with their mark on it.

It’s cut for women across the standard range. Bulk from 10 pieces per design, single pieces available for a fit check first. Production runs 15–30 days depending on order size.

This is the men’s summer set we keep for buyers who need an affordable training kit across a full size range. It pairs a short-sleeve quick-dry tee with matching shorts in a light polyester knit, finished with contrast shoulder piping and a printed side graphic — our reference is a mid-grey build with a small “SPORT” mark, but the colour and the logo are yours to set.

The point of this piece is the sizing: it runs up to 5XL, so a gym or a workplace team can order one kit for everyone rather than sending the larger members elsewhere. The fabric breathes through a summer session and dries quickly, and the shorts are cut with an elastic waist and a drawcord.

Men’s sizing across the standard range into 5XL, with sizes mixed freely in one design run. Bulk from 10 pieces per design; single sets available first. Production takes 15–30 days depending on order size.

This is the cold-weather training set for men: three pieces rather than two, built as compression base layers for spring and autumn sessions. It pairs a long-sleeve hooded top with a short-sleeve compression top and a pair of yoga tights, all cut from a quick-dry stretch knit with flatlock stitching so the seams don’t rub under a pack or across the shoulders during a run.

Because the tops and the tights are cut on the same block, the set layers cleanly — the short-sleeve top sits under the hooded one without bunching, and the tights run under shorts. Our reference is an all-black build with reflective piping and a small chest mark, and we set the colour and the logo from your artwork.

It’s cut for men across the standard range, and the pieces are also available separately. Bulk from 10 pieces per design, sizes mixed in the run; single sets available first. Production runs 15–30 days depending on order size.

This is the women’s warm-up set we build for the moment before and after a session, and for the tennis or outdoor market where a relaxed fit sells better than a compression one. It’s an oversized hooded jacket with a full zip and a cropped, gathered hem, paired with matching shorts cut loose with an elastic waist — our reference runs it in a soft taupe and calls out the oversized fit and the quick-dry fabric, which are the two things buyers ask for most.

Because the fabric is a lightweight quick-dry weave, the set stands up to a warm day on court and dries fast when it does get wet. The jacket is roomy enough to layer over a sports bra, and both pieces are colour-matched from one file, so they read as a set rather than two separate items.

Women’s sizing across the standard range. Bulk from 10 pieces per design; single sets available for a fit check. Production takes 15–30 days depending on order size.

This is the set we build for brands rather than teams: a cotton hoodie and matching joggers, cut relaxed and finished with a puff-print graphic across the chest and a smaller mark on the thigh. Our reference is a navy build with a heart and slogan worked in the raised puff print, and that raised finish is the detail that lifts it — the ink sits proud of the fabric, so the artwork reads as textured rather than flat.

Because it’s a cotton-rich fleece, the set is soft and warm rather than technical, which is why it sells into streetwear, campus and lifestyle ranges as well as as a warm-up piece. The chest, the hood and the leg all take your graphic, and we can carry it as a full-colour print or a single-tone puff.

It’s cut for men and women across the standard range. Bulk from 10 pieces per design, sizes mixed within the run; single sets available first. Production runs 15–30 days depending on order size.

This is the sauna suit, and it does one job: it goes on over your training kit to hold heat while you work out. It’s a long-sleeve full-zip hooded jacket and matching pants in a lightweight black shell with a reflective metallic lining inside, so body heat stays in rather than escaping. Our reference shows it with the hood up and the lining visible, and the fabric is thin enough to wear as an outer layer without bulk.

It’s built for fitness and exercise wear rather than competition, and buyers order it for gyms, weight-cut routines and home fitness ranges. Every piece is unprinted as standard, with the chest and leg clear for a small logo in one colour, which keeps it an easy private-label item. The shell packs down small and wipes dry after a session.

Women’s sizing across the standard range, and we can run the same pattern on a men’s block if you want both. Bulk from 10 pieces per design; single sets available first. Production takes 15–30 days depending on order size.

This is the performance end of our polo range: a short-sleeve golf shirt in 100% quick-dry polyester, cut with a clean two-button placket and a soft flat collar. Our reference shows it in orange with a clear chest area for a logo, backed by a swatch run of ten colours, which is how most golf clubs and resort shops order — a colour they like, with their crest added.

Because the fabric is a dry-fit knit, it moves moisture away from the body and dries quickly, so it holds up through a long round in the sun. We supply it blank for buyers who decorate elsewhere, or print and embroider your logo in-house. The pattern is cut into plus sizes as standard, so a club isn’t leaving larger players off the order sheet.

Adult sizing across the standard run into plus. Bulk from 10 pieces per design, sizes mixed freely, single shirts available first. Production runs 15–30 days depending on order size.

This is the knitwear polo we build for fashion labels and clubs that want a terrace look rather than a sports shirt. It’s a short-sleeve knitted top with horizontal football stripes across the body, a ribbed collar and cuffs, and a three-button placket, finished with embroidered crests, a script wordmark and a woven hem label — the sort of detailing that reads as considered up close rather than printed flat.

Our reference is a navy and white build with club-style embroidery, and that’s the part we change for you: your crest, your wordmark and your colours, embroidered rather than printed so the marks have some relief against the knit. The yarn is a mid-weight that holds its stripe after washing instead of stretching out of line.

It’s an OEM piece for us, so we run it under your own label. Men’s sizing across the standard range. Bulk from 10 pieces per design; production takes 15–30 days depending on order size.

This is the plain polo we make for buyers who want a shirt that looks like a shirt, not a billboard. It’s a short-sleeve cotton polo with a flat knit collar, a three-button placket and a soft hand feel, and our reference shows it in black with a white screen-printed logo across the chest — a clean application that sits into the fabric rather than feeling like a sticker.

Because the body is unprinted, this is the fastest piece in our range to turn around and the easiest to brand: a single-colour screen print or a silicone print, front or sleeve, and it’s ready to sell. Silicone gives a slightly raised, matte finish that holds its edge after repeated washing, which is why buyers pick it over a standard plastisol print.

Sizes run across the standard adult range in men’s and women’s cuts. Bulk from 10 pieces per design; single shirts available for a fit check. Production takes 15–30 days depending on order size.